Effect of XeCl laser irradiation on the defect structure of Nd:YAG crystals

This paper presents the effect of XeCl laser irradiation on Nd:YAG single crystal samples with various number of pulses at different repetition rates and laser fluences. Effects of the irradiation on the optical and structural properties of the crystal are analyzed by UV–vis-NIR spectroscopy. Annihilation of some point defects of the crystal structure is observed following laser irradiation at a fluence of 100 mJ cm⁻² with 100 and 500 pulses. Increasing the laser fluence and pulse numbers leads to saturation and new defects are found to be formed in the crystal. Additional absorption spectra of the irradiated samples show that oxygen vacancies in the Nd:YAG crystals are removed during the low-dose irradiation. The laser irradiation is compared to the thermal annealing process for Nd:YAG crystal modification. Additional absorption spectrum of an annealed sample reveals that induced negative absorption band at 236 nm is correlated with the annihilation of the oxygen vacancy center. Our results also demonstrate that XeCl laser treatment has several advantages upon annealing at high temperatures in the Nd:YAG crystal quality improvement. Thus, the present work can give a new approach to modify Nd:YAG crystals to be used in a wide variety of solid-state laser engineering.     

Ⅱ-Ⅵ族化合物半导体超微粒子光谱性质的研究:Ⅰ硫化物

本文报道了锌、镉、汞、铅硫化物半导体极超微粒子的制备以及它们的光谱性质,比较了它们的粗、细粒子的吸收光谱和荧光光谱的差异,用量子化粒径效应解释了当超微粒子的粒径减小时出现的能级分裂.同时讨论了上述物质的极超微粒子在老化过程中的行为及其原因.     

平面图的圈基内插性质

图Ｇ的一个圈基的长度是该自基中所有圈的长度之和．设Ｃ－、Ｃ－分别是Ｇ的最小、最大圈基长度．如果对任一自然数Ｃ，Ｃ－＜Ｃ＜Ｃ－，都存在Ｇ的一个长为Ｃ的圈基，则称Ｇ有圈基内插性质．本文证明了无三角形的外平面图没有圈基内插性质，并说明存在围长任意大且有圈基内插性质的平面图．     

图的中间图2-pebbling性质和Graham猜想

本文研究了图的2-pebbling性质和Graham猜想.利用图的pebbling数的一些结果,我们研究了路和圈的中间图具有2-pebbling性质,从而也证明了路的中间图满足Graham猜想.     

基于ASME应变限制准则的小冲杆试验等效断裂应变

为更清楚地了解阳江35kV服役导线的运行状态,从分析导线断线原因出发,通过对老旧导线的单丝断裂强度、弹性模量、应力应变曲线、拉断力、抗拉强度等综合指标的测试与分析,研究服役导线的力学性能,由试验结果得出：35kV老旧导线钢芯的直径变化对于架空导线的外径变化有直接的影响,老旧导线的铝线直径变化较小,其外径增大1.67％~4.24％;钢单线的拉断应力仍能达到标准中规定值的106%,且伸长率也满足要求;部分铝线的抗拉强度低于95%;绞线拉断力仍能达到95%的计算拉断力。但是相同规格下的老旧导线的抗拉强度比新导线的抗拉强度低2%~18%。结果表明：阳江地区服役三十年以上的老旧导线在力学性能上仍能继续承载。     

架空输电线防振锤阻尼特性实验研究

本文利用梁的振动理论对防振锤的阻尼特性进行研究。通过正弦激励下的共振驻留法,分别对不同型号以及同种型号不同锤头质量的防振锤进行振动实验,应用能量平衡原理得到了防振锤的阻尼特性曲线,分析了不同模态响应在阻尼耗能中的贡献。考虑不同类型阻尼对于减振性能的作用,在Lazan阻尼假设的基础上,利用经验公式推导了阻尼系数计算公式。结果表明,钢绞线变形大小直接影响防振锤的阻尼值大小;阻尼对减小共振频率附近的受迫振动幅值作用明显,验证了防振锤的减振性能;同时锤头质量的变化可以影响阻尼曲线的变化。以上结论可为防振锤的防振设计和应用提供参考。     

氟橡胶O型圈低压气体密封黏滞摩擦特性实验

开展了低气体密封压力条件下的氟橡胶O型圈低压黏滞摩擦特性实验研究.对氟橡胶O型圈与不锈钢2Cr13摩擦副的摩擦力的时变曲线进行测量,重点分析了密封压力、O型圈压缩率和滑动速度对O型圈黏滞摩擦力的影响规律.结果表明:随压缩率的增加,氟橡胶O型圈摩擦力增加,并呈现出明显的回弹特征,即滞后摩擦力增加且释放时间增加;随着密封压力的增加,其所受最大静摩擦力、滑动摩擦力与滞后摩擦力均呈现非线性变化,且存在一极大值;减小往复运动速度,摩擦力数值增大,但摩擦力极值对应的密封压力值变小.     

苯并三氮唑离子液体作为钢/钢摩擦副润滑剂的腐蚀性及摩擦学性能研究

为了抑制传统离子液体的金属腐蚀性,本文中合成了系列苯并三氮唑离子液体;研究了此类离子液体的物化性质、热稳定性和对钢的腐蚀性;在SRV摩擦磨损试验机上采用钢/钢摩擦副考察了室温和高温条件下此类离子液体的摩擦学性能;采用SEM和XPS对磨斑表面的进行了分析.结果显示:苯并三氮唑离子液体与含有相同阴离子的咪唑类离子液体相比,热稳定性略有下降,但在钢/钢摩擦副条件下其减磨抗磨性能占优,因此推断此类离子液体良好的抗磨性能归因于其对钢无腐蚀性.     

A NOTE ON MORI-TANAKA＇S METHOD

Explicit expressions of Mori-Tanaka＇s tensor for a transversely isotropic fiber rein- forced UD composite are presented. Closed-form formulae for the effective elastic properties of the composite are obtained. In a 3D sense, the resulting compliance tensor of the composite is symmetric. Nevertheless, the 2D compliance tensor based on a deteriorated Mori-Tanaka＇s tensor is not symmetric. Nor is the compliance tensor defined upon a deteriorated 2D Eshelby＇s tensor. The in-plane effective elastic properties given by those three approaches are different. A detailed comparison between the predicted results obtained from those approaches with experimental data available for a number of UD composites is made.     

Microstructural and mechanical properties of thermal barrier coating at 1400°C treatment

The mechanical properties of plasma-sprayed thermal barrier coating (TBC) play a vital role in governing their lifetime and performance. This work investigated the microstructural and mechanical properties of TBC with high temperature treatment at 1400°C by scanning electron microscopy and indentation. We calculated elastic modulus and hardness through the application of Weibull statistics analysis. The results indicate that the microstructure of ceramic coating will change continuously at high temperature, and accordingly the porosity decreases due to the grain growths and crack closes. In addition, the elastic modulus and hardness nonlinearly go up with the heat treatment time and go down with increasing porosity. This demonstrates that the microstructural evolution and porosity of TBC are caused by high temperature treatment, and as a result its mechanical properties are influenced.